G80 lifting chain adjusted tight how to do

　　G80 lifting chain adjustment is too tight solution, the chain is tight adjustment is more common, there are roughly the following three reasons.

　　1, due to serious chain gear wear, but the moment or economy is not allowed, or alien vehicles outside the field before buying the same type of gear, the chain will be tightened to avoid strong vehicle maintenance.

　　2, do not know how to adjust the maintenance knowledge itself, tampering with the chain. This is a vague concept, only know that chain regulation is the range of maintenance, I do not know how to regulate the correct norms.

　　3, change the chain to the chainwheel, the wrong will be lost to the fair gear rack mounted on the motorcycle, causing the chain Suddenly suddenly relax, inspection and regulation, the coincidence loose end, the other end is too tight. Regardless of the above reasons, the chain adjustment is too tight, will thus greatly reduce the service life of chains and chainrings. When the chain is adjusted too tight, due to increased contact pressure with the gear plate, the chain is easy to stretch, the link plate is easy to deform or pull off, the chain will be broken and therefore the roller. In addition, the toothed disk will wear out too early to make the tooth sharp, serrated in severe cases.

　　Above is the G80 lifting chain adjustment is too tight solution, I hope for everyone to help, if you have any questions please consult Yu carved lifting, we will be happy to help you.